返回资讯中心
外部精选
软件工程
#开发者实时流

ZX Spectrum Next Laptop

This project is unrelated to the official Spectrum Next Kickstarter or the Spectrum Next team. I wanted a Spectrum Next laptop. So I made one!

Hacker News 最新utopcell2026/10/19 · 2026/10/198 分钟阅读

以下正文同步自 Hacker News 最新,版权归原站所有,已转换为易读排版。

This project is unrelated to the official Spectrum Next Kickstarter or the Spectrum Next team. I wanted a Spectrum Next laptop. So I made one!

Having created a laptop style case for my ZX Spectrum Next dev board previously, I wanted to revisit the idea of a Spectrum laptop and address some of the issues faced in the previous version.

Some of the issues with the original laptop design were:

With these issues in mind, I decided to start afresh, choosing hinges from a more recent scrap laptop I had lying around and a larger HD screen that would not only support HDMI but also VGA. On top of the improved screen compatibility, I wanted to be able to use one of the fantastic keyboards from a Spectrum Next in the laptop.

With all these changes in mind, the new laptop was designed from scratch, using only a few parts of the previous design (Joystick, USB, and power jack cut-outs). The new laptop must have the following:

I wanted to re-use the screen from an old, non-working laptop. The screen itself is a 14" WXGA LED screen, and when tested with a Spectrum Next, it gave a great display over HDMI and also VGA at 50 Hz.

In addition to the screen, I needed a VGA/HDMI/LCD controller board; there are plenty of these available from the likes of eBay, etc. The size of these boards isn't great for this particular project, but by removing the large unused sockets (DVI, headphones, etc.), I can at least reduce the height requirement inside the laptop.

What is a better keyboard for the laptop than a genuine Spectrum Next keyboard? While it's not as thin as most modern laptop keyboards, it is sufficiently thin for this build, and I prefer the Next keyboard to most laptop keyboards. The keyboard will be "on loan" from my 2nd Spectrum Next, and I'm hoping to pick up a spare keyboard in the future, specifically for the laptop, in order to return this keyboard back to the Spectrum Next that it came from.

Having some spare mini-boards from the handheld project I opted to use one of these for the build. It's small size lends itself well to a laptop and leaves me plenty of room inside the case for wiring and other things.

The previous version of the laptop was built around the Spectrum Next dev board, which, given its size, is not best suited to a laptop design. On top of this, they are hard to find and quite expensive.

The mini PCB, like the Spectrum Next PCB, has the ability to interface with the Raspberry PI and WiFi module, so these are also included in the laptop along with a USB splitter board for future USB devices when they become available in the firmware in the future.

With the screen size already determined and I want to use the Spectrum Next keyboard, the design was built around these in the form of a standard-looking laptop. It is not as slimline as modern laptops, but that's mostly to do with me needing to use off-the-shelf components (LCD driver board, keyboard, etc.) and trying to fit them in.

Due to the size of the parts, initial prints were completed on my CR-10S Pro; these were made to ensure the positioning of the ports and hinges were correct. Once verified, the STL files were sent off to Shapeways to be professionally printed. Once received, I sanded down the parts and painted them black.

After lots of sanding and painting, it is time to assemble the final laptop:

正文由 探How 从来源站点 RSS 同步,内容未经改写;遇到排版缺失或需要图片、视频时请以原文为准。

打开原文
去社区讨论 →