返回资讯中心
外部精选
软件工程
#开发者实时流

Nuclear Fission Fuels is Inexhaustible (2022)

While electric generation can be replaced one for one, replacing space and process heat is assumed to require twice the amount of nuclear-generated electricity to account for the efficiency of generation, losses in tran…

Hacker News 最新andsoitis2026/10/19 · 2026/10/1915 分钟阅读

以下正文同步自 Hacker News 最新,版权归原站所有,已转换为易读排版。

While electric generation can be replaced one for one, replacing space and process heat is assumed to require twice the amount of nuclear-generated electricity to account for the efficiency of generation, losses in transmission over the grid, and efficiency in conversion at the consumer location. For transportation, the ratio is estimated as four to one on the assumption that synthetic fuel is manufactured from the nuclear-generated electricity. Migration to vehicles directly powered by electricity may decrease this ratio. Adding these gives an estimate that it would take about twice the nuclear generating capacity to replace all applications of fossil fuels.

Next, we move on to estimating long-term global energy consumption assuming world population levels off around the year 2100 and that per capita energy consumption worldwide rises to its current level in Europe. This gives a rise from the present level to about 2500 exajoules (or quads) per year in 2200, remaining roughly constant thereafter. Combining with the earlier calculation, this implies replacing all fossil fuels with nuclear electricity will require around 5000 exajoules per year of generating capacity.

Now let us consider the design of the reactors used in nuclear electric power stations. Essentially all civil power stations in use worldwide, whether pressurised water, boiling water, graphite moderated, or other designs, are “thermal neutron reactors”. This means they employ a moderator substance such as water or graphite to slow down neutrons emitted by nuclear fission to increase the probability they will fission another uranium nucleus, thereby maintaining the chain reaction. This kind of reactor can only fission the U-235 isotope of uranium, which makes up just 0.71% of natural uranium mined from the Earth. This means that the rest, the 99.28% U-238, is “just along for the ride” and generates only a small amount of power through the secondary reaction of production of fissile plutonium-239 from absorbed neutrons. The upshot of this is that a thermal reactor extracts around 1% of the energy in its uranium fuel, with the rest being discarded as nuclear waste, requiring long-term storage. The “once-through” fuel cycle used in the United States, which does not even reprocess spent fuel to extract plutonium and unreacted U-235 to fabricate new fuel, is even less efficient, but we’ll assume sanity will eventually put an end to that stupidity, even in safetyland.

The main alternative to thermal reactors is variously called a “fast reactor” or “breeder reactor”. This design has been used in various reactors since the early days of nuclear research and, in fact, the first electrical power ever produced from nuclear energy was by a fast breeder reactor called EBR-I in the year 1951. A fast reactor does not use a moderator, but instead uses fast neutrons in higher enriched uranium to create fission which, by generating more neutrons per nucleus split, strike nuclei of U-238 and transmute them into plutonium. The reactor is called a “breeder” because it produces more fuel in the form of plutonium than it consumes. Spent fuel is reprocessed, extracting the plutonium (which, as a chemical process, is much simpler and less expensive than enriching uranium), that is fed back into the reactor to keep the cycle going. A mature fast breeder reactor and reprocessing cycle can extract essentially all of the energy in the natural uranium with which it is fed, or a hundred times more than a thermal reactor. As an extra benefit, the fast reactor “burns up” most of the long-lived fission products that make nuclear waste difficult to store and produces waste which is largely innocuous after around 500 years. Finally, most fast breeder designs use liquid metal as a coolant, which allows them to run at a higher temperature than water-cooled reactors, improving the thermal efficiency of steam production for power generation and (modestly) increasing electrical power output.

So, by moving from wasteful thermal reactors to fast breeders and using no more nuclear fuel, you can increase the estimated number of years nuclear fission can supply our energy needs by a factor of a hundred. But we’re not done yet.

Finally, consider where that uranium is coming from and what we’re paying for it. Natural uranium (0.71% U-235) is a commodity mined in a number of regions of the world, with production in 2019 amounting to 53,656 tonnes. Over the last decade, the price of natural uranium has fluctuated in the range between US$ 55/kg to US$ 110/kg. At those prices, the cost of uranium is almost a negligible component of the cost of nuclear-generated electricity. Even in thermal reactors, the cost of uranium accounts for only around US$0.0015/kWh, compared to an average retail price of electricity in the U.S. of about US$0.10/kWh.

Assume the price of uranium were to rise to the vicinity of US$14,000/kg, which was the price of gold when the paper was published in 2006. That would make economically viable the exploitation of very low-grade ore (or, if you prefer, high-grade dirt) containing only 1000 parts per million of uranium. It is estimated that at a price of US$14,000/kg for uranium, recoverable reserves would rise to between 40 and 50 times those estimated based on the current price of uranium.

And yet, even at this price, using the costly uranium in fast breeder reactors, the fuel cost of the electricity produced would be less than US$0.003/kWh.

Here are various estimates of the world supply of uranium with mine reserves calculated for its recent price. All numbers in this table are thousands, so the thermal reactor generation power potential from line 2, from an estimate made in 2000 by the Intergovernmental Panel on Climate Change (IPCC), should be read as 7700 exajoules, for 15,400,000 tonnes of uranium.

正文由 探How 从来源站点 RSS 同步,内容未经改写;遇到排版缺失或需要图片、视频时请以原文为准。

打开原文
去社区讨论 →